Automobile Paint Protection Film UV Resistance Long Lasting PPF Car Paint Protector For New Car

Product Discription:

RH-18 series protective film is a surface protection solution for painted and unpainted metal plastic parts,with good UV-resistance and perfect paint compatibility.

Protects the paint surface after the car is finished and avoids unnecessary damage during transportation. Most reliable way to protect cars during the transportation process.

The Automotive and Car Paint protection film has following advantages:

• Can be left for up to 180 days before simple removal

• No adhesive residue left on surface of automotive

• Environmentally friendly

• Easy to apply by hand

• Against Over-sprays, paints, mortar stains, acid washings, and other messes

Feature:

1.100% virgin raw material, high transparency.

2. High-temperature resistance in a short time, above 300% elongation rate, and good elasticity.

3. Easy to be stuck and peeled off, torn off without residual on the protected surface.

4. Printing will not remain on the surface when peeling off.

5. The surface of the protective film is inert and does not easy to react with chemicals.

Application:

• For optimum performance, Ritian Automotive Protective Films should be applied and removed at a temperature not less than 60°F (16°C).

• Surfaces should be dry and free from dirt, oil and other contaminates when film is applied.

• Product Surfaces should be dry and free from dirt, oil and other contaminates when film is appliedtective film should be removed gradually beginning from one edge with a smooth even motion.

Package & Delivery:

Technical Data:

Automotive Car Vinyl Protective Film White Self- adhesive For Vehicle Vessel Interior

Quality Assurance:   

1. Check raw materials before blowing.

2. Checking each roll before cutting.

3. Perform random checks before packing

How to Paste: 

1. Clean the place you want to paste, make sure that no impurities or wax or something.
2. With a fine sprinkling the surface of the wet.
3. Peel the paper off the sticker, ready to paste.
4. Scraped off with a scraper to sprinkle fine, you can use a hard car.
5. Trim the corner excess portio.
6. Gun with roast bake flat corners, and you're done with a good scraper scrape.

Why Us:

For more information on how to select protective films, or to get some samples shipped to you today, Please contact us through phone or e-mail  :)